哦，掌声, um all right! 好! Here it is the green canopy kind of helped to find it. She is broken up a little bit about 50 英里. These three broken arms. 好的. I went ahead and taped the arms back on and i’m gon na go ahead and power it up and uh see. If we can assess how much damage was actually done see if the motors still work see if the camera still works. 好的, just turned it on let’s, see if she Applause that’s, a good sign, camera’s working, 那是, a good sign start the motors yeah they’re, all turning great okay. I can get these arms on ebay for about 25 bucks each and replace the three arms which i might end up doing uh. If i do that, i’ve got to unsolder the motors and try and fish the wires through saw a guy doing on youtube, looks like a lot of work. I think i can just go ahead and use some epoxy and fiberglass here and fix it up. I’M sure that i can make the arms just as strong as they ever were, and give that a try i’m going to go ahead and start repairs on the right front. Leg. First i’ll remove the tape holding it together and use some 30 minute epoxy just to kind of tack it in place. Before i add some fiberglass, and maybe some carbon fiber got some 30 分钟. Epoxy mixed up here go ahead and apply it to the broken area of the arm.
Put the arm back on and tape together. Let that set up before i put on some fiberglass that’s epoxy back together. Let that set up for an hour or so and then we’ll go ahead and add some fiberglass it’s been a couple of hours now it’s been setting up pretty well hardened, i went ahead and removed. The tape looks like it sealed it up pretty well and i’m, going to go ahead and add some fiberglass right now and that’ll really give it a lot of strength. You can’t just use epoxy it’s, just not strong enough. You’Ve got to reinforce it with several layers of fiberglass or carbon fiber and i’m repairing the left front arm as well. I used some wire to try and get that sealed up as much as i could and here’s. The patch i’m gon na go ahead and put epoxy on the arm first and then just put the patch right on top of the epoxy and then a little bit more epoxy. On top of the fiberglass. Now we’ll go ahead and put on the fiberglass cloth and i think that looks pretty good. Let that set up and then i’ll go ahead and trim off the excess with a razor blade. I went ahead and trimmed the fiberglass on the right arm and now i’m going to go ahead and do the same thing for the left arm and then i’ll put another coat of epoxy on there. I think that’s going to be good enough.
One wrap of fiberglass seems to be thick enough on here. It seems pretty strong. It looks okay and then i’m going to go ahead and finish up the rear arm. Sanded the arm down a little bit before i put on the final coat of epoxy, put the final coat of the epoxy on the arms, and i went ahead and put the canopy back on. The propellers are all back on and i use a little bit of a blue thread lock on all the screws to make sure they don’t vibrate loose yeah. 好的, here we go we’ll see this thing works after the repairs, good start, 音乐, 那是, a normal mode. Everything looks good in the goggles i’ll, bring it back toward us yeah. 我觉得是, good Music and now i’m going to put it in s mode, 音乐. 好的, here we go all right, so that should be max g’s on there held up okay, 音乐, 好的, i’m gon na go ahead and check the gimbal all the way down at the level. All the way up and back to level seems to be just fine head on out here. A little bit turn left turn right.