In this video i’m going to quickly go over its features and specs show you how to set it up and share with you my custom settings which, na minha opinião, made it fly better, give you my feedback after testing it out and, claro, show you some Flat footage, Em primeiro lugar, in terms of packaging inside the box, along with the quadcopter, you are getting a spare set of gemfan 1636 full bladed propellers in addition to the ones which are pre assembled on the motors, a total of three timoto branded battery velcro straps, The original antenna of the calex vista system and the full pins just connector, which i’ve already used that will enable you to easily connect an external radio receiver to the flight controller. As for its packs, the timotart 180 is a pusher style micro quadcopter. It features the latest version of the timotor 1103 8000 motores kv, which can handle up to 3s batteries when pushing 40 millimeters propellers on the center of the quadcopter. You can find the 25.5 de 25.5 millimeters f4. All in one flight controller that features an integrated 13 ampere, blas 481 esc led units which are located on its sides, a usb type c connector, which is conveniently located on the top side of the flight controller and gst connectors for easily connecting an external radio receiver And the cadx vista unit, which is located underneath the flight controller, the battery is mounted on the top side of the frame and it is using an xt30 battery connector in order to reduce some weight instead of using the original codex vista antenna, it is using a Lighter linear antenna, the nebula nano camera unit is well protected by the frame.
The wheelbase of the frame is 80 millimeters and it features a truex pattern. The thickness of the top carbon fiber plate is 1.2 millimeters and the frame is made out of a high quality. Durable plastic material. In addition, the weight of the tron 80 without an external radial receiver is 72.1 gramas, including a crossfire nano receiver. Ele pesa 73.4 gramas, including a 3s 300 milliampere lhb battery. Ele pesa 101.3 grams and including a 3s 450 milliampere like a battery, which is the one that i recommend to use. The total weight is 114 gramas. You should note that, according to timotor, the tron 80 is capable of carrying an action camera and they provide you with stl files that will enable you to 3d print by yourself mounts for the smo 4k and the insta360 go to cameras. The weight of the tron 80, including the smo 4k camera and its mount, é 110.8 gramas, and i plan to test this setup on an upcoming video. As for setting up the tron 80 first of all in case, you are not going to use the dji radio controller, you will need to disconnect the signal sms wire that connects the kalix vista and the flight controller and then install an external radio receiver, either by Plugging it directly to the gst connector of the flight controller or by soldering it to the euro 2 pads under the port section of bit of light. Como você pode ver, the serial rig switch is already enabled on your uo2, which is going to be connected either to your external receiver or to the built in receiver of the codex vista.
The configuration msp switch is enabled on the old one in order to display all the osd data on the hd feed under the configuration tab. You should note that the motor direction is reversed and you need to pay attention to it when installing the propellers out of the box, the ec slash moto protocol was set to digital 600. Contudo, in order to improve the performance of the tron 80 and extend its flight time after following the excellent whoop tuning guide by tmek, which is linked down below, i changed it to digital 300 and after flashing the escs with just maverick firmware. I enabled the bi directional digit switch and set the moto pulse value to 12.. In addition, i also updated the pid profile and filter settings and in case you would like to try out these custom settings which again, na minha opinião, made the tron 80 fly better. You can find a link to the custom down file down below. The next thing that you need to do is to make sure that all the sticks and switches are working properly after binding the ready receiver with your radio controller and then define your favorite flight modes and osd elements overall after testing the timotard 180. I can tell you that, na minha opinião, it’s a very fun to fly and resilient micro quadcopter, currently at the moment of shooting this video there aren’t many binance flight options in this category for the dji digital ftb system.
The biggest competitor of this quadcopter is the gap of c thinking p16, which i have previously reviewed, and in case i had to pick one of them. I would probably go with the tron 80. Since the pusher style configuration seems to perform better. I prefer the top mounting option of the battery and the tron 80 seems to be more durable. In addition, it’s worth mentioning that i really like the top usb type c connector, and i hope that other manufacturers are going to use it as well as for flight time. You can expect between two to four and a half minutes using a 450 milliampere 3s. Like a battery, o que é, na minha opinião, the recommended one to use as it will provide you with the best balance of performance and flight time in case you would like the throne 80 to be a little bit more agile. You can also use a 300 million pr 3s lhv battery, mas então, claro, your flight time is going to be reduced. I also tested the tron 80 using a 2s battery. Contudo, i don’t recommend it because it is just going to be under powered, so in case you would like to flight indoors, and you think that 3s is just too much for you. I recommend to limit the moto’s output using bit of flight as for its downsides. Em primeiro lugar, the biggest issue that you are going to notice in the flight footage is that the tron 80 suffers from a lot of jello, especially during daytime, na minha opinião, é.
A result of the combination of the plastic frame and the fact that it’s using the enable nano which is more prone to jello. The second issue is that the tron 80 is not very external ready, receiver friendly and even though the flight controller supports it, you will find that it’s not going to be very comfortable to mount the ready receiver and its antennas. In addition, when mounting the battery, you need to make sure that it is going to be properly secured in its position, as in case it is going to move around, is going to damage the flight performance and securing it in its position. Using this type of battery blocker straps can be a little bit cumbersome. Finalmente, i think that it could have been better if the vista unit would have been properly protected, maybe using a transparent plastic sheet and by the way you need to make sure every let’s say. Five or six flight that the screws of the vista system are properly secured, as i have already lost two of them due to the vibrations anyway, that’s going to be it for this video, which is still not 100 complete, as i still need to test the tron 80, with an smo 4k camera, hopefully it’s, going to happen soon, so stay tuned for the upcoming video i’m going to wrap up this video with some flight footage and as always, if you have any questions, feel free to ask them.
In the comments section down below don’t forget to leave a thumbs up.