Teraz, every week we get tons of questions from viewers asking about different features and functions of the Evo 2 and as a pilot and a nerd, I love nothing more than diving in deep to find those answers and getting back to you now, most of the time There are simple questions where I can reply to an email or I'll post a comment on youtube to answer the question, but every now and then the questions a little bit more complex and involves a little bit more testing, so I'll head out in the field. I'Ll, do the testing and then I'll put a clip like this together answer five or six of those questions at one time now. These questions today were the most popular questions. We'Ve been asked, since we did the last clip and some of these I held off on because a new version of the firmware was just shipped to me yesterday and I've loaded it on the drone it's version v1 0.8 and some of the features that people were Asking about testing were in the application, but they weren't actually enabled yet, Tak myślę, on the beta firmware. So I wanted to wait until his new version came out. So if I showed you the screens of how you get to those different adjustments inside the application, they would be pretty close to the one you'd see when you're flying your drone. So I'll go through these five questions and I've put a time code below.
So if you're not interested in one of the questions, you can skip ahead and one of the others in case it's. The one you've asked now I expect there'll be other questions. Cuz we've got a pile of them that I'll have to answer in another clip. Coming up soon so stay tuned for that, ale na dziś, I'm going to tackle the top five that came in since the last clip was put up and again some of these I couldn't test until this firm over its release. So the first question has to do with the gimbal movement. Now a lot of the quads in the market today, some of the Mavic products – certainly the Parana NAAFI – allow you to take the gimbal above the horizon. So normally a gimbal will go down 90 degrees and straight to the horizon, with the Mavic series, you can go up 30 degrees and with the anafi series you can go up 90 stopni, so you've got a full 180 stopień. Gimbal movement on the anafi that's not possible here, because obviously the camera is underneath some of the electronics. So the best we can hope for is that up 30 degree mark and that's been in the firmware, but it hasn't been enabled. So I went out and tested that in the field – and it actually works really well and you might be thinking. Why do I care about pivoting, my gimbal above the horizon? But there are times where you want to sort of look up at something, maybe it's a sunset or it's, the moon rising or you want to see the top of a tree.
And if you can't go above the horizon, that means you've got to physically lift the drone up to the point where the camera can see it at a horizontal view. So having that extra 30 degrees up really makes a big difference. So first I'll show you how to enable it it's, really simple and then I'll show you an example outside where I was just flying in the front yard. Looking at one of the trees, that's in bloom, it's a beautiful time of year and then pivot that gimble up 30 degrees above that tree, so you can actually see the sky above it so stay tuned. Then I'll show you how to do the setting first and then I'll show you how it looks from the camera perspective to enable the expand to travel at the camera. You'Ll start at the main menu of the application and tap the Settings icon in the upper right hand corner of the screen. It looks like a little gear, then you'll tap the gimbal tab on the left hand, Stronie, and you can enable the gimbal pitch limit by sliding the button next to it. To the right now, I'll show you the advantage of being able to swing your camera upward. I'M, hovering in front of a tree in full bloom, and if I wanted to see the top of this tree with most drones, I'd have to elevate to that height and look straight at it. Since I had this feature enabled I can slowly swing the camera upward to see the top of the tree well above the drone and even catch some of the sky behind it in the frame as well.
This one feature really does expand your filming options with the Evo 2. This next question was easily the most popular when asked by viewers, and it was does the Evo to support waypoints. Now that can be a deal breaker for a lot of fliers out there, especially if you're gon na use the drone commercially because being able to set up a virtual pattern of behavior in the sky over a particular target. Następnie, when you hit the start button, the drone will execute. Autonomously is an incredibly powerful thing. So imagine the drone flies to the first. Waypoint takes a picture of something then elevates and maybe even spins and starts. Recording video footage at the second Waypoint does something different at the third fourth and fifth, you've got a drone that is really like a flying. Robot that's running this mission for you that you can repeat over a period of time. You can actually save that pattern and run it every other day or once a month or every couple of weeks and if you're surveying a field that can be really powerful to monitor crop growth or, if you're, watching a construction project trying to gauge how much work Is getting done over the course of a couple of months, maybe for insurance purposes, you've got all that data and you can just go out in the field once you've saved that pattern hit the button and have it run it every time you want it to run So having waypoints inside the unit is really powerful.
Now a lot of other drones can kind of do waypoints, they're, not that sophisticated, but there's a ton of third party applications out there. That can really do some pretty incredible patterns and monitoring of different areas, but having it in the drone is a really good thing. So the short answer is that, tak, it can run waypoints and they don't call it waypoints. They call the missions, and the good news is that the geniuses that autel have actually built in three predefined formats that you can use there's one called waypoints, where you can actually point it map and put dots out there and it'll fly to those different dots. And you can modify those it's got a rectangular one which sets up a rectangle and you can sort of expand it and spin it, and all that and then the last one is called a polygon where you can actually have this Reard shape and make it go. Zigzag across the field or around the corner it's a lot of different ways. You can modify it so what I'll show you next is how you get to those different missions and I'll show you some examples really quickly what they look like now, I'm gon na. Do a full clip running these missions out in the field, so I'll have that coming up soon, but this is one of those that wasn't really enabled before it was working, but it wasn't working great in this latest version, it's working great, so I'm gon na spend Some time and put that clip together, but for now let me show you how to get at those missions and what they look like just so.
You have a rough idea of how sophisticated this drone really is to access the missions. Menu. You'Ll start on the splash screen at the applique and instead of tapping the camera tab to fly, your quad you'll want to choose the missions. Tab you're then presented with three choices for the type of mission that best fits the area that you'd like to fly and a list of other missions. You'Ve created and saved. Choosing waypoints takes you to the main screen for this type of mission. Once here you can tap the screen to start setting up your waypoints and you can set up as many waypoints as you want. Each one of these waypoints you create will be a location in the air that your quad will fly to and complete a specific action. This can include taking a picture or recording some video before flying along to the next Waypoint. Once you were finished, creating all of the waypoints you need, you can tap on each one of them individually and make adjustments to the action the drone will complete. While at that Waypoint, when you're finished tap the icon on the right to start flying this particular mission, the next mission is called rectangular and you can choose this one by tapping that tab to get started simply tap the create project button on screen, and this will Place a rectangular mission around your current position with a default size and orientation. You can easily modify this initial map to suit your needs by simply dragging the waypoints when you're finished tap the icon on the right to start flying this mission.
The final mission is called polygons and can be started by tapping the corresponding tab to get started with this mission, tap create project and you'll see an outline of the pattern the drone will fly. You can adjust this shape as needed to accommodate the area you'd like to cover when you're finished, tap the icon on the right to start flying this mission. This next question was: can I change the home point and I think where that questions coming from is normally a drone will set the home point at the takeoff point. So if you got a mat when it takes off it registers that as its home point and if you're flying for a while and you get into trouble or the drone senses something going wrong. It'Ll automatically do a return to home and come back and land right. Where it took off, but let's pretend for a second that you've launched it from a boat and then you've driven that boat across the lake a little bit if it goes into a return to home. It'S got to go back to where it took off and there's going to be no boat there. So having the ability to choose the Waypoint either be the point of takeoff or the person flying the drone, because you've got the controller in your hands is a really powerful thing. So this drone allows you to choose between the takeoff point or the controller, which is called me.
The application were to leave their land were, took off or it'll follow the controller to wherever it happens, to be when it's time to return to home. In addition to that, there's, a couple other cool things that they built into here around visual navigation aids that really impact the return to home and I'll talk about those in this section as well. But first I'll show you how to decide between landing where it took off or landing where the controller happens to be, and then I'll show you what those other features are that you can turn on or turn off, depending on your your needs out there in the Field to choose which home point you want the quad to return to you'll start at the main screen of the application and tap the Settings icon in the upper right hand corner. This looks like a little gear, then you'll tap the general tab on the left. In the upper right hand, corner you have a choice of where the quad lands. If you select aircraft, the drone will return to its original position, i, if you choose me, the drum will find the controller when returning the home. There are three more interesting settings that affect the return to home function and to access those tap. The visual navigation tab on the left hand, menu scroll to the bottom of the page and tap advanced settings to see the three options. Downward vision. Positioning helps the drone to maintain its position when GPS signals are weak and it actually improves the accuracy of the landing landing protection allows the drone to detect an unsafe landing area if there are obstacles below it and make accommodations for those obstacles, the accurate landing option Will guide the drone to as close as possible to its return to home point for a near precision landing? I always recommend that all three these options are turned on to help with an accurate return to home.
I spend a little time testing this to see if the precision landing has been improved with the latest version of the firmware and I'll show you the results next today, I'm outside to test the precision landing of the return to home function on the Evo 2. Behind me, at the last time I did this test. I had a beta version of the firmware, which I don't think they enabled the precision landing in yet, and I got close to the mat on all the 25 czasy. I tested it, but it didn't land exactly where it took off I'm, hoping since I've downloaded a new version of the firmware that's the release version that they've actually enabled precision landing on the quad. Now the reason I'm standing so far back from it is because it's got incredibly accurate crash avoidance, and I don't want it to see me as something it should avoid in the way down so I'm trying to stay back really far away from it. So that impact its ability to land where it took off now the test is going to be simple. I'Ve set the return to home height at 120, feet I'm, going to send it down field about 200 feet hit the return to home key. Let it do what it's going to do and let's see how close it comes to the mat. So I'll spin up the props and I'll elevate it a little bit and give it about 5 feet of elevation just to give it a chance to fix its position, and I know a lot of people suggest that you need a 25 stóp.
So let me take it up: that's 15 feet right there and another 5 feet will be 20 so I'm, giving it three different stops to try and fix its position. Give it a couple of seconds all right: I'll, send it down field and I'll, try and get it up above those trees, because that would be a horrific crash during the test. If I took it into a pine tree, W porządku, we're down field about 100 stóp. 130, 170. W porządku, we're at about 200 feet there, I'm comfortable with that now I'll hit the return to home key takes a couple seconds for it to recognize that okay there's the beep it's now and return to home mode it's elevating ruff to 80 stóp 100 feet should Stop at 120 right on the money 120 stóp, it's stopped it's sitting there trying to fix its position and figure out where it took off. W porządku, it's spun around heading back my direction now coming back, really quick and it's just about over the mat and it's slowed down, and it looks like it's making some adjustments up there site. I really believe that it's looking down at that map, in addition to the GPS coordination it's using it's, now spun around to face the same direction it was in when it took off and it's descending now. I'M back, I don't know 25 30 feet away from it and it looks like it's. Pretty close, it may be off to the right a little bit but we'll see as it gets closer looks like it's, making some adjustments on the way down so that's encouraging yeah.
I actually think it moved over to the left a little bit so it's coming down from this angle. It looks like it's gon na land right on the mat, so now that I'm – not near it, I can't really tell but let's see what happens. Boise it's gon na be close. Oh man that's right on the money. I want to call it a boom I'm gon na call it a boom that's, a precision landing and the reason I'm going to give it a couple of inches is because it's kind of windy out here and when it went up it kind of drifted, a tiny Bit to the side when I held it at five feet, so I think if it fixed its position when it was off the mat at five feet, it's going to land exactly where it took that picture so I'm gon na test it a bunch more times, but At this point, I think if they haven't fixed, it perfectly they've actually improved it dramatically over the other test. I did because in those tests earlier, it was off the mat by four or five feet which again at the time I said, I don't really care, because I don't need it to land on a dime on the mat as long as it gets back to where It took off I'm more than happy to take control with the sticks and land it myself, because maybe things have changed and it took off and I've got to land it somewhere else.
So I like the fact that it got it back and I can adjust that if I need to, but for me man, that's, close that's, really really close so I'll. Do it a couple more times. If I get a better result, I'll show you what that looks. Like but right now, I'm gon na have to say that they've definitely improved the return to home and the precision landing to me looks almost on the money. This next question was: how can I see the battery details and how much control do I have over those batteries? So this is a great question, because a lot of the quads out there have automatic discharge. The batteries in this are intelligent enough that if you haven't fully charged and you put them away for a period of time, you don't want to store them fully charged. So the battery is smart enough to say you know what Rick forgot that I was fully charged and that's, not a healthy state for me to stay for any length of time. So I'm gon na automatically start the discharge and then some of the quads that do that you don't have a lot of control over how soon that starts or how long that discharge takes so in this drone people are asking. Can I modify that discharge rate? Can I start it the first day that I've got it in the case? Can i delay it for up to six days and the answer is you can and I'll show you how to get at that setting the other question had to do with the return to home thresholds, because the drone is smart enough to know that if you're flying And you're not paying attention to the battery levels if it gets to a critical case where it's far enough away or if you fly to any longer you're, nie gon na, have enough battery power to get it back to your takeoff point, the drone will take over Well, there are settings inside the drone where you can set that critical battery level, those thresholds that actually trigger the warning where it's beeping at you to say, Hej, turn around and come home and the return the home threshold word says: I've, given up on you, I'm Flying home, because you're gon na crash, if I don't, do that those are in there as well and I'll, show you how to set both of those first I'll show you how to set what I'll call the decay rate, which is basically discharge rate of how many Days, it takes to start to discharge and second I'll talk about how to set those two thresholds to access the battery settings.
Page start in the main menu and tap the Settings icon in the upper right hand, corner locate the aircraft battery tab on the left and tap that on the next page, you'll find all the information you'll need about your battery's health. The first thing you may want to adjust are the battery thresholds that trigger a low battery warning and a critically low battery warning. The first threshold will sound an alarm when your battery power drops below this level and the second threshold will actually trigger an automatic return to home. I normally set these at 20 do 25 percent for the low battery warning and 10 do 15 for the critically low battery warning. The next adjustment you may want to consider is the number of days before the batteries automatically start to discharge. If left unused, you can access this by tapping the icon next to the time to discharge setting – and I normally set this for 3 days to keep my battery safe. This last question is: where can I check the firmware details in the app and that's a really great question, because if you've been a pilot for any length of time, you already know that is just a part of life. Companies are constantly pushing out firmware to do. Updates to their products, and invariably it's gon na happen on that beautiful Saturday morning, when you power everything up before you get ready to leave the house and on the application a little banner will pop up at the bottom saying: hey there's new firmware out.
Do you want to download me and install it and you're thinking to yourself? I don't know if I do it was flying yesterday, just fine, I don't know if I need to update the firmware. So my suggestion is, if you get that message go to the website in this case for autel and read the release, notes for the firm or just to see if there's, something in there that you really really care about, because a lot of times firmware will fix Problems with the drone, maybe they're squashing, bugs that they've uncovered or they've introduced new features that might be interesting to you so make that decision on your own, but understand that the firmware is sort of an ecosystem of software that touches everything in that ecosystem, so it'll Load up on the quad, typically it'll load up on the controller it may even load up on the battery and it's, really important that you understand exactly what those firmware levels do and maybe what's changed between the old one. You had in the new one they're trying to push to you, so the recommendation I would make is, if you decide to do a firmware update before you. Even do it go to the firmware page and I'll. Show you how to do that in a second and screen capture that page so do a picture on your phone. So you've got all the firmware levels before you did the update and then do it again after you do the update that way.
You can compare them side by side in case something funky starts happening after you do. The update, but what's interesting about autel is that they give you a lot of information on that firmware page. They break down all the different firmware levels for the es C's inside the drone, gimbal, sterownika, a battery it's got all firmware levels listed in there that are all a little bit different, so their firmware package when it's loaded, unpacks and goes out and touches All those circuits now most other companies just give you a rough number at the top. They don't tell you all the nuance of what that firmware does, but all I tell does so: I'll show you those screen, snacks and show you how to get at them. And again my suggestion is snap. Those pictures archive them on your computer, so if you ever have to roll back to an older version of firmware or you forgot weird problems, and you call hotel, they're gon na say to you what version of ESC firmware you're on I don't know. Dobrze, save that picture it's going to be important if you need it later on, ale tak czy inaczej, I'll show you how to get at those settings now to check your current versions of firmware start on the main page of the application and tap the Settings icon in the Upper right hand, corner of the screen next tap the generals tab on the left hand, side of the screen.
Wreszcie, tap the firmware version to access the main page. You'Ll have to scroll to see all the different versions of firmware, but here you'll find all your current versions that are loaded on your quad, your controller and your batteries and it's a good idea to screenshot. This page for future reference, if you ever decide to upgrade your firmware later to a newer version, W porządku, that's, pretty much it for this week's questions. Teraz, if I haven't answered a question that you've got, please send it to us, I'll. Add it to the list, and I promise you we'll – get to it sooner or later we're doing our best we're spending a lot of time out in the field I've been flying this almost every day since it showed up as long as the weather is good and I'M telling you it's an amazingly cool quiet it's got some features in it that are just really advanced beyond anything else. That'S out there today and I know, I've been raving about it a lot and I fly all the quads on the market today, but right now this is hands down my favorite quad to be flying. So if you've got questions send em in we'll get to them. I hope you find these clips helpful I'm doing my best to try to stay ahead of all the questions people are asking. I know this is an incredibly popular quad and there's a lot of interest out there for it.
I was lucky to get it early and I'm happy to do these kind of tests. So if you've got questions, let me be your testing guide go out there and test it in the field. I'M. Also going to put some other clips together, walking through the software, because now that I've got the final version of it, I'm actually gon na put a clip together that does a visual walkthrough of all the tabs. All the settings and everything you need to know about the firmware. I didn't want to do that before now, because a lot of times I get beta, I do the clip and then I find out in the final version they move stuff around and it's, not at all correct. So I don't want to put one out there. That'S a little bit older, I want to start with the fresh stuff, so stay tuned for that. I'Ve also got comparison clips between this and a lot of other popular drones on the market. The Mavic to the sky do to the anafi and I'll be posting. Those in the channel very soon as well and that's, pretty much it for today.