fbpx

Emax TinyHawk Freestyle – ToothHawk



Desk of Contents: 02:57 – HQ 65mm prop overview 04:08 – Emax Avan 2.5″ overview 05:02 – Quad overview 11:20 – Destructive elements 14:26 – My highest …


37 Comments
  1. Table of Contents:
    02:57 – HQ 65mm prop overview
    04:08 – Emax Avan 2.5" overview
    05:02 – Quad overview
    11:20 – Negative aspects
    14:26 – My highest recommendation
    15:18 – Floss holders
    16:20 – Xyletol

    TinyHawk Freestyle: https://bit.ly/33dLLNQ, http://bit.ly/2ML7WoY
    I think this coupon code is 5% off the emax site: KWIYUIKOMUIA

    Recommended prop: http://bit.ly/2MLu02z
    Recommended 1S batt: http://bit.ly/2Te1aJq
    Recommended 2S batt: http://bit.ly/33gCW5W
    1S charger option 1: http://bit.ly/31p8LaS
    1S charger optoin 2: http://bit.ly/31qZeQU

    DO NOT BUY THIS CHARGER! http://bit.ly/2Th5Puf or http://bit.ly/2yMnfoZ
    IT IS AWFUL AT BALANCING AND BLOWS UP OCCASIONALLY!

    My favorite Xyletol mints: https://amzn.to/2GPKgfq
    Read the top review 😉

    ▼Join my FB group for more discussion: Kabab FPV
    https://www.facebook.com/groups/379155946182689/

    ▼ My typical 5" quad setup:
    -Hyperlite Glide Floss (will be re-released soon)
    -Motor 1750kv/ESC combo: http://bit.ly/2XAEHXH
    -WaFL’s Cap Cap: http://bit.ly/2GUpXxO
    -Battery: http://bit.ly/2XXjbwU
    -FC: http://bit.ly/2XRc8G8
    -FPV Cam: http://bit.ly/2Q7LfL7
    -Vtx: http://bit.ly/2HsrASs
    -ND GoPro Mount 30deg: http://bit.ly/2WC15zc
    -ND Filter (if used): http://bit.ly/2WEmQ1j
    – My favorite battery: http://bit.ly/2xWjYTJ
    -An annoying 643g AUW on this quad

    ▼Notable motors:
    -Xing 2306: http://bit.ly/30uYo4Q
    -Xing 2208: http://bit.ly/2y3te8R
    -FANTASTIC 6" motor: http://bit.ly/2LqghOZ

    ▼ 5" Sub $200 build that's still good
    -Frame: https://goo.gl/EpXQhZ
    -FC/4in1 Stack: https://goo.gl/HprVbj
    -Motors: http://bit.ly/30uYo4Q
    -Props: https://goo.gl/ZnzY2y
    -Props: https://goo.gl/VMBiQh
    -FPV Cam: https://goo.gl/FDJhYw
    -Vtx: https://goo.gl/JNVDMn

    -Starter goggles: http://bit.ly/2Mw0yNS
    -Batt pad material: http://bit.ly/2QGWhYb

    ▼ If you want to solder better:
    -Fantastic solder: https://amzn.to/2P5QM2W
    -Fantastic iron: https://goo.gl/DqBipa

    ▼ Lighting equipment:
    -Ring light: http://bit.ly/2ODSg9A
    -Panel light: http://bit.ly/2KmDApP
    -Power adapter: http://bit.ly/2YD5jHT
    -Tripod: http://bit.ly/2MDsMX2
    -Mini tripod: http://bit.ly/2MGL4Hf

    ▼ Tips?
    -PayPal: https://www.paypal.me/kababfpv
    -Bitcoin: 1E4XZXoD4rS6MYWVWuenY7Kw2M1YgyNpoQ
    -Nano: xrb_1188ek5bd7tb9kw67asnp9o65byuoaxbtpxuznx1ribf75x78awywmakj55f
    -ETH: 0xD067F93811f2eC31CB1928901002dfdf9A492EF5
    -LTC: La2KWYAjp4VT2Lq2M76pbjzXWvRyjpfCtG
    -Tesla Referal code: https://ts.la/bob40889
    Please use my referral code if you're gonna buy a Tesla. You get some free stuff when you do and I get better status with Tesla.

  2. I think it's sold out everywhere.. I need this little bastard!

  3. THANK YOU SOOOOO MUCH!! I got mine in today, put a few sets of packs through it and WOW! Used your link to emaxusa Friday. I’m in Virginia. That shipping time was awesome! I figured ide have it this Friday if I was lucky. Super happy Bob thank you thank you thank you.

  4. Amazing flying! Excellent overview of this little ripper. I want one now. Just think about one lipo on top one on bottom.

  5. If I remember good you tested the TinyHawk S too. If yes, which is better? Thanks!

  6. Hey kabab. 🙏 Thanks for inspiring emax!

  7. Wich one I should choose? This Emax, the ldarc ET 125 or the emachine wizard?

  8. Can I bind it with flysky radio?

  9. Sounds good and the price is right but motor mounts ruin it for me. When the motors get damaged, there's no options.

  10. Thanks for the video. This was I was looking for. Ordered one from Banggood using your coupon code to save a few bucks! Thanks!

  11. What do you think is the best toothpick style quad at the Moment?

  12. This thing flies awesome!!! But holy hell, why does Emax have to use such a terrible RX and VTX? The VTX is like a hair better than useless. Video performance is absolute garbage IMO. The video on my Beta65s at 25mw is far superior, and that's saying a lot. Even with a Crosshair antenna on the goggles. This needs a Unify Nano32 and Crossfire Nano RX STAT! Like, it flies sooooo good, but the horrible RF performance is hard to get over if I'm honest. It's hard to really enjoy the thing when you're constantly worried about losing picture or having a failsafe. Emax needs to step up the quality in that regard. It totally hinders the experience.

    Edit: After trying a linear antenna on the goggles, video performance is much better. Like night and day better. Still not great, but at least it's acceptable. Using various CP antennas on the goggles all sucked, no matter the gain it seems.

  13. Drone show show show show show show show show show show show show show

  14. Kababfpv what about gaoneng gnb 1s hv ???

  15. Wow iam very happy now that I pre-ordered one 😁👍 thanks for this review!!! Maybe that vtx can be swapped out for that nano eachine one it puts out enough Milliwatts and is very lightweight and has smartaudio. And thanks for the info on the sugar alternatives! But that makes me wonder now….. What do you think of the effect of fluoride on the brain?

  16. Would be intersting to see a mod having one battery on top and the other on the bottom. And thanks for the tip on the floss holders 🙂

  17. looking great, thanks for sharing

  18. You say you used 2x 600mah 1s but in the description you recommend 2x 450mah 1s…
    Pros cons?;)

  19. I realize the babyhawk is extremely old news, but I am still flying it after 2 years on all the original parts. That says something about Emax…

  20. Rear left and front right prop (motor 2 & 3) is the wrong kind 🤣

    Hope to get the frame only, to swap my diy turbobee 120rs components into this sexy frame!

  21. All in one boards are good for companys that are greedy. If one esc fails you gotta replace the whole board. And since it's a custom board you have to get it from the company and they are gonna rack up the prices cus they are the only ones selling that board. Atleast have a separate 4 in 1 esc so you're not forced to replace the fc and everything else on it just because a single esc fails

  22. With all the products coming out in this class… I'm super torn. I cant functionally build a toothpick because of a brain injury. I cant keep my hand still enough to get the MICRO parts perfect ad I would with even a 3 inch build. I want nothing more than a real Kabab toothpick but some of these options are making me say…should I just pull the trigger? I love everything you've designed and own 95% of it, except the toothpick. Are you putting out a bnf version of yours by chance. I'd be forever in your debt. It's my next purchase and I'd love to have one for west coast this year. My first vacation in 13 years, plus it's on my birthday!!

  23. Hi I work with a 5 "fpv design, my idea is to make it as strong, light and small as possible
    the dimensions between the center of the motor shafts are 150mm. Here is a link to illustrate the idea:

    https://www.facebook.com/photo.php?fbid=10215566864671434&set=pcb.10215566895832213&type=3&theater

    The design is based on 3mm carbon fiber plate, 8mm carbon fiber tube and 5mm soft waterproof foam plate where the electronics are held in a vertical position (not illustrated yet). comments are welcome.

    full speed from here

  24. Anybody know if turtle mode will work as it comes? Is setting it up in BF all that will be required or will we need different props?

  25. As far as why toothpick builds might be more sensitive, I think it has to be how the whoop-style boards are fastened. A lot of the gummies that are used to mount the boards are a bit too soft, which can either be good or terrible. Or the other direction, people are hard mounting the boards and leads to more difficulty tuning because the filtering might need to be adjusted and refined to get it flying well.

  26. Couple things… "inbetweencock"?? Secondly,

    Neighbors wife: That kid is playing with toys again.

    Her husband: I think that's the dentist?

  27. me @15:26 : Grabs floss, dabs Xylitol, Thanks Bob.

  28. Hi bob. is that the same board as the tinyhawk S?

  29. nice quad, but i was more interested in the xyletol bit at the end. really interesting! thank you for the dentistry advice

  30. Hi Bob, dentistry related question! What's your view on amalgam fillings? Do you think this stuff is safe for use in the mouth? What do you think about research relating these fillings to the onset of Alzheimer's?

  31. What cam used to record the flight in the lower right during the first half of your video?

  32. It’s in the mail. I appreciate the dental advice at the end clean teeth and a great smile will get you anywhere 😁

  33. Love the dental content, keep up the good work! What's your opinion on tongue scrapers?

  34. Stevia isn't a sugar but it does mimic that effect on your taste buds. Hard to overcome the licorice flavour though. Xylitol has a cooling effect which is why it works well with mint. Tastes weird as a sugar replacer elsewhere though. Oh yeah nice quad btw 🤓

Leave a Reply to mindmantv Cancel reply

Drone Review Videos & Price Comparison
Register New Account
Reset Password
Compare items
  • Total (0)
Compare