Hs 110. I have cases i like anyway, first pocket. This is extra props there’s, four of those in there. Четыре, more props, Очень хорошо, two full sets. I like that new user guide, it’s pretty thick i’m sure it’s in more than one language, looks like approximately this much for english battery 7.4 вольт. Another of the same looks to be a charging cable, Хорошо, есть, two charging cables here c port, both of those usb to c and screwdriver common holy stone, удаленный. It needs two double a batteries. These are your antennas right here, a little sticky very much like the other holy stone remotes. I have phone holder right here, gps on and off tilt your camera speed, control lights, camera to video yep it’s. All the same here it is the holy stone. 700 e explains why there’s two packages of props, because there’s none on it to begin with, so you only get one extra set, but very nice very nice. This drone is about 275 в 300. я верю, can’t quite remember, 90 degree tilt camera. It looks like it’ll be very stable just because of the rubber mounts sd card slot – hopefully i’m in rubber mounted nice solid, landing gear i’m. Guessing this is all lighting, not positive, но это. What looks like led lights, i’m gon na put it together and give it a shot. Хорошо, they gave you two chargers looks like this c port plugs right into the battery itself, so you do not have to have it in the machine to charge it very nice.
You can charge both at once, because you got two chargers. If you have two boxes also, i wanted to show you the ease it doesn’t appear that the this is a b prop. It says a right here, Я, Извините, so this is an a there’s, a little a right in there, you probably can’t, see and there’s the b another a another b. This prop has a b on it right here, simply put it in push down and turn snaps into place. Super convenient super easy. One thing that we noted is the a prop is going to go in turn the opposite way. As the b props. There is an arrow on it to tell you which way to lock it and which way to block the b as well, so that if it doesn’t go in and lock you better make sure you got the a and b right next on this i’m going to Download the app i have an android, so i will download through this qr code. I have went online before and downloaded just from what i believe i’m reading here. Let’S say the philadelphia go app. I look up, philadelphia go and i get the wrong app. So i do like to use the qr code, something to be aware of it could say: adelphia go and not be the correct app as holy stone does every single one of their drones. I have as a different app kind of annoying actually, but i have about five or six holy stone apps now, and none of them are the same so i’m going to download this i’m going to put this on the charger, and once that is done, we will Take a test flight i’ll, show the calibration methods and and getting the compass calibrated as well as the gyro, hopefully so stay tuned.
This is looking at the battery as it’s charging, so just wanted to see what it looks like on the end of the battery and i’m guessing when all four of them are solid. Green that’s, full battery looks like it’s about half now out of the box um. I might let it charge we’ll see how long it takes, and i will update that as well. When i get a full charge. I haven’t fully charged this battery yet but i’m gon na go ahead and put it in so we can show you i’m gon na calibrate it get it ready for when the other battery is fully charged. Первый, you’ll see the prongs here and the slots on the battery simple clips. In no problem, and on and off that checks, your battery Music, you can see, got about three three bars. We can deal with that to take the battery off. We simply squeeze these together and pull it off so you’re on off button right here you got three bars on our battery. The drone is on. We can start calibrating and get all that done and then i’ll go ahead and charge the battery fully before i take off. So i can kind of test how long it lasts i’m going to show you how to pair it now pairing the remote to the drone. You simultaneously hold the lock button, as you turn on the remote push the button down, hold it those two beeps.
That means you are paired now you can see our drone here. Что ж, maybe you can’t see on that there’s. A picture of the drone and the battery shows it’s got three bars. This is showing our signal. We have a high signal right now. We have no gps signal because we are indoors and it just turned on so it does take a little bit to gather a good signal we’re in mode two. I know it’s hard to focus on that and since we’re paired i’m going to go ahead and move to the next step, which would be calibration of the compass and the gyro okay for compass calibration, we take the remote we put both down to this direction. Hold it this little icon will start blinking slow you’ll have yellow lights into there. Next you’re going to take your drone and turn it in complete revolutions three times at this point, your light should turn green. I know it’s hard to see you take your drone and turn it in complete revolutions. Three times once you have a green and red, your compass is calibrated. You can see in the book. This is what you’re looking for a green and red. You also want to make sure you have a good gps signal, so we came outside and right here you can see 15 в 16 GPS, Хорошо, Я, going to take this off and give it a shot. I don’t have the battery fully charged.
So this is just going to be a quick off the ground, see what it does here. So in order to unlock the motors first thing, you’re going to do is push in this button. The motors run we have up. I set it back down here because battery’s a little bit too low don’t want to fly very far. The remote started, making a beeping noise, and hopefully you can see this. It shows right here. The battery is at one bar, so it automatically returns right to where it taken off from it sits down itself. The battery was low, it said it’s time to come home and it automatically came to the home. We also have a home button right here. So if you push this button anytime during your flight, it will land back where it started from the first takeoff that you just did before that flight. So if i take off from here, it comes back to here. If i set it down – and i go let’s say 30 feet over and i take off again, it will land the next time that 30 feet over. So something to be wary of is, if you are flying these in a boat boats, do move on the water. So do not come to your home; it will land in the middle of the water. Don’T ask okay, so we’re gon na charge. The battery one thing i do want to note is: when it comes from the factory: it is in slow mode and um or low.
They call it you can’t really tell here but there’s a low and a high and right now i got it in high, because slow is so entirely too slow. It makes it very hard to control your drone simply because any amount of wind you’re fighting it to get your drone to move. So i always like to move in high mode, even as a beginner, i would suggest possibly going to high mode. You do have more control, i feel here we have a oh, my drones dying here. Хорошо, so back to this, the drone’s off uh, the battery is toast i’m gon na go through the remote real quick here we have a take off and landing button. So if you push that uh, the drone will automatically come up to approximately three feet: единой системы обмена сообщениями, possibly four i’m – not sure about this exact drone. I just use my controllers to take off um. You have a camera button here you could take still pictures or video. You have lighting control here, just turning them on and off push of a button. It is also controls your high and low mode. So if you push and hold it, it will go to high. This is your tilt, the 90 degree tilt for your camera. Here you have gps on and off and never shut it off. You simply just it. Doesn’T make sense to me um this button right here is a false button. It doesn’t do anything but it’s just for looks and that’s kind of the end of that again you have x.
This is just purely for extra grip on your control. Here you pull up and has a great phone holder there’s a little flip down piece here.