February 7, 2019
RC Review – Eachine Falcon 250 FPV Quadcopter Review (from Banggood.com)
You possibly can see the quadcopter right here – http://bit.lc/4ajB Thanks for watching, please LIKE and SUBSCRIBE Joyful flying!
source
You possibly can see the quadcopter right here – http://bit.lc/4ajB Thanks for watching, please LIKE and SUBSCRIBE Joyful flying!
source
CC3D layout with usb port on rear side is sick. Much better is on left or right. We can turn the board 90 deg left or right but why we have to do it?
Hello, I have a question for you, what is the latest upgrade 2017-18 for the eachine falcon 250 (one with the tilted motors)?
Thank you and happy flying
i want extra batteries where can i buy those
in the pic on the online shopping i can buy has a flysky controller will it come with it?
because yours doesnt come with a transmitter
what is the diferences between this and the falcon 250? thank you
Hi I am new to fpv and I don't know what radio to use. Does the drone come with one or will I have to buy one separatly? If so send me a budget radio which will be compatible with this drone
Thanks Sam
i am a newbie. when ordering one of these, which controller should i get and why? cc3d, naza32 or the sp racing f3?
thanks.
Thanks a lot for your guide Painless !
I ordered this thing, friday, but now I've seen some videos.
Apparently I have to take this thing a part. To connect USB. OMG
I thought this was RTF ?
well have to wait a couple of days I guess.
How much extra weight can it lift
$248 RTF right now on Amazon.
21$ OFF on Eachine Falcon 250, use coupon: Eachine
Here: http://www.banggood.com/Eachine-Falcon-250-FPV-Quadcopter-with-FlySky-i6-2_4G-Remote-Control-5_8G-HD-Camera-RTF-p-1026335.html?p=SW13098803992014116A&utm_source=bbs&utm_medium=dealsfortech&utm_content=zhangruihua"
So, what if during the output calibration one of the motors requires considerably more to startup than all the others? And does it have to do with the ESC or the motor?
thanks for sharing?
i am using librepilot and when i use setting bank one it doesnt fly to the settings I have choosen and always flies forward. When I switch from settings bank 2 or 3 to settings bank 1 it flips and crashes… my settings bank 2 and 3 are fine but serious issues with bank 1. PLEASE HELP! ive reinstalled everything and used default settings
why would two motors spin when calibrating the esc's
do you think it would be the cc3d board or receiver i also noticed 2 wires coming off the pdb that are connecting to the receiver
why would two motors start to spin in the esc calibration
It is a fantastic machine and terrific value !! http://goo.gl/T4YD2P I had the racer first but hated the screen. The falcon is superior as its faster and stronger. I am now practicing while saving for decent goggles. Cool video !
ive managed to do the whole thing but it seems ive done something wrong the motors spun up during nuetral settingi left the trans setting on pwm as there is many wires coming out of my reciever plus chose qav 250 and set disarm to a stick movement…i cant work out what else to do i just followed you and it was working until i unplug the usb and give a command from the trans and thre is nothing…? can you help me??
hello agian i went though the librepiliot upgrade and got to the end like you but now it wont work
can you tell me what i click on where you clicked on ppm for the eachine i6 transmitter when i carry out the librepilot flash?? is it worth me attempting this as a beginner?
Is there a RTF FPV you like better at similar price level?
can I use frsky D4R-II rx?
I usually do NOT leave any comments, but your videos have been excellent and informational. As for the plugging in the usb… I did want to add your video link for the "how to" Bluetooth connectorfor the CC3D https://youtu.be/aqhcpz-faLk. I use this to calibrate my flight controllers and I've had great luck. As you stated near the end of this vid. Thank you for ALL of the great info you have given us!
Do I need to do any modifications to fly this FPV in England with the vr 007 goggles? Thanks!
(Great review though!)
Eachine Falcon 250 or Eachine Falcon 180
Hi,
It would be be great to have a video of you flying the Eachine Falcon 250 FPV in decent
outside open space with your opinion of its performance. Thanks in anticipation:)
I have completed all of cc3d steps successful. I did a quick throttle test without the props. the quad is rested on a level surface. I armed the quad. I slowly move throttle stick up until it started to spin and I kept the stick there. I notice the motor gradually got louder despite the fact the throttle stick is not moving up. This happens only when it is in flight mode 1. In mode 3 this does not happen and the motor appears to keep at a constant speed. is this normal? it seems strange so I thought to get clarification before I start the test flight. Many thanks.
Ive just ordered this RTF ..will it fly ok out of the box?
I'm trying to add telemetry for my osd I have Eachine VR007s and the Falcon250 but there's not much on it ?? any advice would be great. thank you for your videos and explanations.
channels like yours are a huge help and step in the learning process.
thank you.