Floss 3.0 – http://bit.ly/2Ua1P2v Immediately we check out the Hyperlite Floss 3.Zero racing body. The Floss is synonymous with light-weight racing frames at this level.
Hyperlite Floss 3.0 | The Best FPV Racing Frame?
Floss 3.0 – http://bit.ly/2Ua1P2v Immediately we check out the Hyperlite Floss 3.Zero racing body. The Floss is synonymous with light-weight racing frames at this level.
I used to be able to watch your race test videos, but now I just get nauseous and dizzy and puke most of the time because of how fast you have gotten. Not your fault, I'll just stick with your reviews ?? Murica!??
Modo 2 ghost still have a frame on the wall or somewhere round here! Droga, $45 Não é? Good frames don't get any cheaper than this. I was gonna pay nearly that much for a damn Hawk 5 quadro.
Damn man you've gotten so fast!
impressionante revisão, and a quick couple of questions :
Are the 1300mah 6s tattu packs still good?
Is 1850kv 2206 com 1050 mah 6s a viable setup?
Frame is about 100 gramas
Parece incrível! Grande de voar também! Ei, you mentioned that you're switching to 20×20 stacks. Is there a 20×20 ESC that you recommend that can handle real 6S racing?
Very nice run an review
love this frame so durable. it is quite literally gate smasher i broke a piece of 3/4 inch PVC in one hit, no damage to the quad. manter o grande trabalho.
hey i got the floss 2.1 i want to through racewire/racelite on it should i get the mini or the normal size what fits the best ?
Loving the design of the floss. I’ve got a 2.0 5” and a 2.0 5.5". I want to add this one but I’ve been mainly running the torque pro 5 the last few months. Also another great frame with a top mount option. But I will be adding the 3.0 to my fleet soon for 2019 as well as another one that will becoming soon, not a floss.
Enjoyed your review, unique perspective – I was missing them! Would you still recommend the frame for people that run 30×30 stacks? I have always been concerned crash impact on the esc – for the same reasons you mentioned in the vid. Could it be that 20×20 is then the only way to go – have it more tucked in – for these open canopy frames? Or is 30×30 still ok in practice?
Flying looks, suave, under control and fast. Impressionante.
grande revisão . I hope you do more gear reviews !
You make it look easy man!! If you had to pick a simulator to help a beginner what would you go with?
Have you tested the hybrid quads
bela revisão! Would love to see a video of your preferred electronics, motores, adereços, and firmware. Além disso , do you plan to re-visit FlightOne/Betaflight one testing at all?
Is that floss love I sense? Kebab would be so proud <3 haha, but in all seriousness; I'm new to the hobby, so I just binged through all of your videos during the last week. Ótimo conteúdo! I've had a blast following your FPV story so far! I don't know if you pay any attention to it, but you have a natural storyline going through your videos. That's what made hours upon hours of content interesting to watch in such a short time period. The big races are obviously a lot of fun to watch, but you can make the story a lot better by adding more build up content. More content in general (don't waste time on editing too much) will net you a more fulfilling storyline to your FPV adventure, and I'm starved now that I've cought up with your videos! Now that my loveletter even incorporates some feedback, I'll finish by saying that your channel is my favorite on youtube for the moment! Let's keep it that way going forward, certo?
how much does it weight?
Pretty impressive how durable it is, cara. Fantástico! ?
That other quad, are you sure it wasn't the quad from Hammergate? ?
Cara, I'm still watching, but I have a tip for you about the TPU things. Try printing them with a higher temperature than the recommended. (Don't ask me how much, I don't even have a 3d printer yet. ?)
De qualquer forma, the person who gave me this tip was NJ Tech during a Let's Drone Out livestream. ?
Which 20×20 stack are you using?
Do you run in 5” configuration or 5 front 6”rear? obrigado.
Before I say anything I just want to say that the floss 3.0 is a great frame especially for the price! Now onto my thoughts… , this is gonna sound bias but I actually don’t like the floss 3.0, it’s a great race frame, however the aluminum plate bends in a hard crash, arms break way to easy from my experience , and also it’s almost identical to a fpv flight club proton frame in terms of design. Is the floss 3 Bom? Yes and no, for the price it’s hard to beat, but best racing frame ever?! Maybe Not, but it’s very comparable to other frames out on the market and is definitely one of the better options
Nah best frame ever isn’t out yet ?
i have more than a year with mach1(after i video i saw from you) and i was very happy but i bought a floss3 and the first day a get 3 second less than my mach1 for lap same electronic and i did the chance at first for the arms price but now it is for the overall specs
Would you recommend the Doberman v3 or the floss 3?
the design is ok
Always enjoy your videos and it's nice to see how excited you are about the frame, great content and discussion surrounding your experience with it. I've been eyeing one for myself… soooo hard to resist hehe.
I wish they sold a 6” 5” offset arm option rather than all of us having to buy 6” arms which are inevitably sold out because of this.
I’m curious why they didn’t design the antenna mount to use the Axii direct 90* mmcx connection antenna? The antenna and mount would never break that way as it can’t touch the ground. Pensamentos?
Ótimo vídeo, John! Any chance you could outline the details of all the components you're using this season (including links to the TPU pieces)? I pretty much copied your Ghost build last season and I love it (except for all the Aikons that blew up on me!). If you can find the time it would be greatly appreciated. Paz!!
How well does the red camera mount protect the cam?
Nice informative review, obrigado
Yesss! Glad to see you back at it man. I didnt realize you were on the Floss 3 at nationals. Its gonna be a hard choice for me to stay with the CF1 or switch everything to Floss 3 for this upcoming season. I tried the new Nylon pod, with TPU spike fin, and wowsers. Now to decide on brace or no brace.