K20 Drone Review

Firstly, turn on the airplane switch Music and then turn on the remote controller. Switch Music continuously press the return key for three times until the remote controller. Beeps pick up the drone and rotate the drone in a horizontal clockwise direction until the remote controller beeps wait for the drone to access the gps signal Music when the remote controller beeps succeed in frequency matching unlock the remote controller in the auto manner, and the drone Takes off basic cooperation, demonstration Music, app operation demonstration scan the corresponding system of the instruction to download and install the drone app and then turn on the mobile phone wi fi to access the signal transmitted by the drone after the success in wi fi connection open the Drone app and finally clamp the mobile phone on the remote controller, gps designated point flight click, the designated point flight button on app click, the screen to set the flight route and then click the send button. After the setting is completed, gps, fixed point, circling click, the fixed point, circling button on app and put the height and radius and click the confirm button. Gps, smart, following click: the gps following button on app and start the following function of the drone: Music, Music, indoor flight, long press, the speed key to change the mogai to the model, Music and unlock the remote controller in the auto manner. And the drone takes off Music fan, blade, installation press. The fan blades then rotate and take out the fan blades when in installation pay attention to the corresponding fan, blades press the fan, blades and rotate and install the fan, blades Music charging instructions when the battery is charged.

The indicator light flashes Music when the battery is fully charged. The indicator light is always on the remote controller is charged for about 14 minutes turn on the remote controller switch and the remote controller is fully charged.