What you’ll need your phantom 4 rtk aircraft, the remote controller aircraft batteries, the remote controller battery white charging hub black charging hub ac adapter and the micro usb cable? The first step of the drone activation process is to get your batteries fully charged plug the ac adapter into a wall socket and then connect the opposite ends into the two included charging hubs. The white charging hub, which charges your aircraft batteries, will connect to the rectangular plug, while the black charging hub, which charges the remote controller’s battery, will connect to the cylindrical plug, make sure to switch the white charging hub to charging mode when attempting to fully charge the Aircraft batteries, the other option, storage mode – will keep batteries at a 50 charge level for long term storage. The black charging hub does not have charging modes, but instead has a switch that will either allow or mute a repeated beep once the battery is charged, go ahead and insert the aircraft batteries into the white charging hub and the remote controller battery into the black charging Hub charging the batteries typically takes between 30 til 45 minutter. Så, while we wait, we can take care of a few important tasks. These include creating your tgi account downloading companion, software and ensuring your drone is protected. Først, you will need to register a dji account. This account will access all things related to operating and updating your drone. If you already have an existing dji account, you can skip this step visit.
Once your batteries are fully charged insert an aircraft battery into the aircraft’s battery bay and connect it to your computer, using the supplied usb cable make sure you have removed both the protective clamp and the foam stabilizer above the aircraft’s camera. Failure to remove these before startup can damage the gimbal motors during the aircraft. Startup sequence open up, dji assistant 2 for phantom and log in using your dji account power on the aircraft by performing a short press, followed by a long press. After a few seconds, dji assistant should recognize the aircraft you’ve connected to click on the icon and follow the prompts to activate the aircraft. Once you activate the aircraft, you may be prompted to update the flysafe database, which contains the latest boundaries for restricted airspace zones. It is also likely that there will be a new version of the aircraft firmware available. Keeping your phantom 4 rtk’s firmware up to date is crucial for ensuring optimal performance, while collecting surveys. Please visit our help article in the knowledge base for details and instructions for installing the latest firmware updates. Næste, take your fully charged remote controller battery and insert it into the back hatch of the remote controller power on the remote controller. By performing a short press followed by a long press. Følg, along with the first time setup, prompts to pick your language time zone and other system preferences make sure you have connected the controller to a wi fi network so that you can log in with your dji account when, given the option select to always use the Gs, rtk application onboard the remote: this is the application that we recommend for all drone flights and surveys similar to the aircraft it’s likely that you’ll need to update the controller’s firmware visit our help article in the knowledge base for further details, let’s review some important information.
Remember it takes about 45 minutes for the drone’s batteries to fully charge if you’re eligible, you must bind your dji enterprise shield basic plan within 48 hours of activating your drone, finally always check to make sure you’re running the latest. Firmware updates for your drone and remote controller. You may be unable to fly without having the latest firmware. Thank you for watching for more information about the phantom 4 rtk.