We have seen some of the main novelties of the new firmware that dji released for mavic 3 on the 24th of january, and now the mavic 3 is as it should have been at the november launch. Before this there was a another update made in December that added focus track modes, then active track then, and spotlight as well as the mastershot. Now we can consider the complete mavic 3, even if further updates and news are not excluded, so lets see together. What are all these new firmware? 0 500, as we have seen in the test, quickshots have been added, then the rocket circle elix boomerang and asteroid dronias, the high resolution panorama mode has been added. The burst. Shots have been added digital zoom for the normal video mode. The one that uses the main camera now at 4k, it is possible to zoom up to 2x digitally, while for the upper camera, the one with the zoom is the one that has native 7x optics, but that reaches up to 28x with the digital zoom. The sharpness has been increased, then the color assist has been added for the dlog or the color assisted mode. When you activate the dlog normally on the smartphone, we receive an image of faded return, as it is normal that it is because the profile is flat by enabling this item the image displayed on the smartphone is in color, while the one recorded on the drone naturally Remains dlog regarding the mastershot 4k 60 fps resolution has been added the possibility of making manual adjustments.

Now we have the quick transfer that allows you to transfer the images recorded inside the drone memory, which is 8 gb, but also of the sd card via smartphone, i.e. on the smartphone, by activating bluetooth and wifi for the focustrack modes, as we have seen. In the example of the active track has been added a zoom up to 2x and the log mode other very important addition. E much requested by users is the possibility of changing the automatic return home system. Until today, the drone independently decided the height of the automatic return home, depending on the obstacles it encountered, and in any case it did not work. Like the previous drones, he decided whether to go down in diagonal and what behavior to assume with this update. Dji has added the possibility of enabling the traditional return home, and that is by setting it height when automatic return is triggered. The drone moves to the height set by the user and then returns home. We will see it shortly for the cine version of mavic 3. Usb mode has been added for data copying. The color correction has been optimized as well as the image area for timelaps, then, as regards the dji rc pro the new smart controller, the smart controller 2.0, in addition to working with the dji air 2s. With this update, the hdmi output is without telemetry and in addition, it can now store the cache of the v video as it happens on smartphones and can transfer videos to external sd.

Finally, some bugs have been solved. I must say that the more I use it, the more I like the mavic 3, also aesthetically in this test. I found it excellent with these improvements, but lets see how the rth mode now, as I said, we have two possibilities: the advanced mode, which is the one that exists since the launch that lowers the height according to how he wants to say so, and the straight Line mode, then I set a height of 80 meters for the automatic return home return in advanced rth mode and lets see what happens now. The drone is 46 meters high. I press the button to go home and the drone does not go up to 80 meters, but remains 46 meters, because it also relies on detection, sensors and obstacle avoidance in the event that he now sees an obstacle. He would bypass it, but does not go to the 80 meters that I have decided. As I said, he manages the aspect of the height and can change it at any time. He can also go down diagonally. He can go down vertically. In short, he decides he decides the autopilot. At this moment he has arrived on the vertical and then goes down to land. I remind you that this drone has the precision landing, so it is enough to stay a few seconds on the vertical of the take off point and do not run away once you take off to make the drone recognize the terrain image of the take off point And land on it on the way back, as in this case, the slight deviation we saw is due to the obstacle avoidance sensors, because there was a close person.

Well lets do a test to see how the traditional automatic return home works if it actually works. As the release notes have explained, so I take to this distance, I would say that setting the height 80 meters is enough. We are at 54 meters. I press the return home button automatic. The drone turns the bow towards the landing point and we notice that the drone, in addition to climbing, is practically diagonally because it goes forward. I dont know if you noticed it. However, it did an uphill stretch: diagonally. It went to 80 meters and then headed towards the landing point. So its still, I said its not exactly like a traditional homecoming is a middle ground, because when it climbs it goes up, diagonally to reach the preset height and then in a straight line, goes to the landing point on the vertical of the landing point and then Lands on it still relies on the sensors for the initial part of elevation when the automatic return home is triggered. However, he gets up diagonally and relies on the obstacle avoidance sensors. If he encounters an obstacle he would circumvent. This strategy is also used to save battery. I would say that in any case, even if it is not really traditional homecoming, in my opinion, it is a good improvement, makes all those who fear that the return home advanced during the descent calm you encounter some undetected, obstacles and bump into them. Well, I would say that everything, let me know what you think in the comments, thanks for your attention and subscribe to the channel.

https://www.youtube.com/watch?v=N4qBb3cwMZo